Kusam Meco 351, Power Clamp Meter India, PowerClampMeter.com

BALANCE LOAD 1/3 PHASE TRMS KUSAM MECO 351

POWER CLAMP-ON METER WITH PC INTERFACE 17 FUNCTIONS 23 RANGES

Main features:

Ultra-Slim jaw to access tight places.
600A AC Clamp-on + Multimeter ranges
600V AC/DC input protection on all functions
AC True RMS Voltage and Current functions.
Balanced-Load 1-phase / 3-phase Power W, VA & VAR measurements.
Dual display Power Factor (PF) & A-Lags-V Phase-Shift indication
Auto VM ™ AutoVA (Auto Selection on ACV, DCV or ACA functions)
Power measurement of Selectable W, VAR & VA with dual-display Total Power Factor features.
Display PEAK-rms HOLD & Data Hold function.
Fast Peak-rms Hold (65ms to 90%) for In-rush ACA & ACV readings.
Measure line-level ACV Frequency via test leads
Measure non-invasive ACA frequency via clamp jaws.
Battery Cover with probe holders.
Fast Audible Continuity.
PC-Comm computer interface capabilities (Optional).

GENERAL SPECIFICATIONS:

Sensing : True RMS sensing
Jaw opening & Conductor diameter : 26mm max
Display : Voltage Function : 6000 counts LCD display
Power, Ohm & Hz functions : 9999 counts LCD display
ACA clamp-on function : 4000 counts LCD display
Update Rate : Power function : 1 per second nominal Voltage, ACA clamp-on, Ohm, & Hz functions :4 per second nominal
Polarity : Automatic
Altitude : Operating below 2000m
Low Battery : Below approx 2.4V
APO Timing : Idle for 17 minutes
APO Consumption : 10mA typical
Operating Temperature : 0 C to 40 C
Relative Humidity : Maximum relative humidity 80% for temperature upto 31oC decreasing linearly to 50% relative humidity at 40oC
Storage Temperature : -20 C to 60 C, < 80% R.H. (With battery removed)
Temperature Coefficient : nominal 0.15 x (specified accuracy) / 0C @ (0oC-18oC or 28oC-40oC), or otherwise specified.
Power supply : Standard 1.5V AAA Battery x 2.
Power Consumption : Voltage, ACA, Hz & Power functions : 10mA typical
Ohm function : 4mA typical
Dimension : 189(L) x 78(W) x 40(H) mm
Weight : Approx. 192 gms

SAFETY:

Meets IEC61010-1 2nd Ed., EN61010-1 2nd Ed., UL61010-1 2nd Ed., CAN/CSA C22.2 No. 61010.1-0.92, IEC61010-2-032, EN61010-2-032, UL61010B-2-032 & CAN/CSA C22.2 No. 61010-2-032-04: Measurement Category : III 600 Volts AC & DC.
Pollution degree : 2
E. M. C. : Meets EN61326-1: 2006 (EN55022, EN61000-3-2, EN61000-3-3, EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11) In an RF field of 3V/m : Total Accuracy = Specified Accuracy + 45 digits Performance above 3V/m is not specified
Overload Protections : ACA Clamp-on jaws : AC 600A rms continuous + & COM terminals(all functions) : 600VDC/VAC rms
Rugged Fire-retarded casing
LVD EN61010-1 & EN61010-2-032 CAT III 600V

ACCESSORIES:

OPTIONAL ACCESSORIES:

PC interface Kit, (including BUA-2303 USB-to-Serial adaptor, BA-1XX optical adapter black, BC-100R cable & Bs Software CD)

Check Out